Lightning Protection System & Equipment

The newest lightning protection system of Global Lightning Technologies was the result of constant research as well as laboratory simulations of the lightning activities introduced in many locations. Because of the continuous research they are able to generate technically sophisticated lightning protection equipment, which is why the lightning protection equipment is being distributed and marketed internationally.

Each lightning protection system created by Global Lightning Technologies is able to manage erratic power courses, supply power trails and provide secure ground wherein the power courses squanders securely. Each design is carefully made to match the strictest international standards.  Our lightning protection equipment is perfect for installation on monuments, bridges, water vessels, and trees for defense against damages brought about by lightning.

The lightning protection system of Global Lightning Technologies includes the newest technologies with regard to lightning protection equipment as well as in the production of strike termination mechanisms.

The following are 3 of the most remarkable lightning protection system and services tendered by Global Technologies:

  • Eritech System 3000

This system characterizes the most remarkable technology. This lightning protection equipment is made up of non-radioactive components and is suitable for people who require sophisticated lightning protection system. This design comes with an event counter recording the quantity of lightning strikes and making it convenient to trace the incidence of lightning in particular area. The lightning protection system covers an ample range of shield because of the volume design concept.

  • Eritech System 2000

This device utilizes high class insulation coverings which put off side flushing. This is the original of all types which was employed. It possesses the efficiency which is confirmed overtime due to the concept of its high class insulators.

  • Eritech System 1000

The design of this lightning protection equipment was experimented on UNE-21186 and NFC17-102. It is created from high-grade stainless steel. This lightning air terminal protection is well-matched for any environment, voltage conditions and surges.

Each system contains exceptional features varying on the range of function. However, the usual characteristics of their lighting protection devices are:

  • Excellent performance and design litheness
  • Components and fittings matched the international standards
  • Trouble-free installation and cost effective
  • Constituents employed for the design are non-corrosive
  • Low impedance grounding arrangement which distributes the lightning energy securely

The designs of Global Lightning Technologies are suitable anywhere regardless of what the situation is. Our complete range of equipment has been checked and guaranteed to provide protection in any situation and severity of lightning strikes.

Lightning Protection Design Malaysia

[sniplet Lightning Protection Design]

Direct Strike Lightning Protection

ERITECH® System 3000

ERICO’s System 3000 is a technically advanced lightning protection system. The unique features of this system allow optimum performance, flexibility of design, and overall cost-effective installation.

ERITECH® System 2000

ERICO offers the System 2000 series of air terminals, downconductors and fittings in accordance with Australian-AS1768, British-BS6651, Singaporean-CP33, European-IEC and USA-NFPA780 Standards.

ERITECH® System 1000

The ERITECH® SI Series encompasses three air terminal models and accessories that are designed to comply with the requirements of the French NFC17-102 and Spanish UNE-21186 Standards.

ERITECH® System 3000

ERITECH System 3000 Dynasphere

Generic Specs

ERICO Downconductor


Reano Video


UL 2000 Certificate
Electrix Award

Reference List

Test Papers
ERICORE 3rd Party Test
Dynasphere Wind
Load Test


Online Brochures

With almost two decades of successful field application, the ERITECH® SYSTEM 3000 was enhanced in 2003 with an optimized ERITECH® DYNASPHERE MKIV air terminal, ERITECH® ERICORE cable system and supporting design software for a greater protection level. These advancements are a result of research, involving long-term field studies, laboratory testing using some of the largest outdoor test laboratories, and countless research study programs including joint ventures with accomplished scientists in the field, resulting in some of the most up-to-date published technical papers and journals.

The ERITECH SYSTEM 3000 has evolved from this research activity, with earlier versions of the ERITECH SYSTEM 3000 providing a building block for the latest advancements through extensive field studies, leading edge indoor and outdoor high voltage testing and supported by computer modeling research.

ERICO is involved in the lightning protection industry in many countries around the world and hence acknowledges the diverse protection methods that exist today.

The ERITECH SYSTEM 3000 integrated direct strike protection system provides protection for structures, buildings and their occupants against the effects of direct lightning strikes.


Advanced lightning system based on latest lightning research and technology.

Location of air terminal(s) on structure is determined using LPSD, ERICO’s proprietary Lightning Protection System Designer package.

Collection Volume design principle used by LPSD resulting in effective lightning protection coverage.

Economical and easy to install.

Consists of:

ERITECH DYNASPHERE Air Terminal – non-radioactive terminal manufactured from high quality, non-corrosive materials.
ERITECH ERICORE Downconductor – purpose-designed shielded downconductor reduces the risk of side-flashing and safely conducts lightning energy to ground.
Grounding System – purpose-designed low-impedance system to safely disperse lightning energy.
Lightning Event Counter – automatically registers lightning strikes, thus proving the efficiency of your system.


The ERITECH SYSTEM 3000 can be used wherever there is the possibility of direct lightning strikes that may affect valuable equipment and/or facilities
These include communications towers, television stations, oil/gas platforms, high rise buildings, schools, hospitals, factories, and explosive/volatile fuels storage areas
Applications that require the benefit of an isolated protection system would benefit in particular using the ERITECH SYSTEM 3000.

More Information


ERITECH SYSTEM 3000 Installation

Modern research and recording methods have led to a better understanding of the lightning discharge process, and various breakthroughs have been achieved in the simulation of lightning electric-field conditions. ERICO has been one of the leaders in this field of research, employing a combination of computer modeling, field studies, natural and rocket triggered testing and HV laboratory testing techniques. A number of technical research papers have resulted from this work.

The ERITECH DYNASPHERE has been designed to meet all of the criteria necessary for the controlled emission of a streamer. The concept of controlled is important because it is not effective to launch a streamer too early – the ambient field will not be large enough to convert the streamer to a leader and so the streamer will cease to propagate.

The characteristics of an optimum air terminal are:

1. Minimal pre-strike corona / space charge
2. Streamers released only when the ambient electric field can sustain leader initiation and propagation

The ERITECH DYNASPHERE D/SMKIV-SS has been developed with these two concepts in mind.

ERITECH® System 1000

Test Paper





NFC UNE Certificate



The ERITECH® SI Series encompasses three air terminal models and accessories that are designed to comply with the requirements of the French NFC17-102 and Spanish UNE-21186 standards.

The ERITECH SI has been extensively tested at an independent high voltage laboratory. Tests have been performed in accordance with the requirements of NFC17-102 and UNE-21186 norms.


Designed and tested to NFC17-102 and UNE-21186
Stainless Steel design suitable for most environments
Available in three models to suit specific site requirements
Suitable for connection to a variety of downconductor systems including tape, cable, smooth-weave and ERITECH® ERICORE conductor
Fully compatible with the ERITECH® SYSTEM 3000 mast, ERITECH ERICORE cable and accessories


The application of the ERITECH SI Series is simplified by LPSD, ERICO’s proprietary Lightning Protection System Designer Software, to provide the highest levels of lightning protection to the NFC and UNE country standards. Based upon individual site parameters, such as structure dimensions, terminal type and protection level, each LPSD design is customized for the project and provides elevation, 3D and plan views resulting in specific designs optimized for your facility.

More Information

Our online ERITECH® Lightning Protection Calculator is now available for use!

The online calculator is designed to aid customers in selecting various ERITECH Lightning Protection products, build a Bill of Materials, request a quotation and view individual product specifications.

ERITECH® System 2000


System 2000 Cable System

System 2000 Brochure


ERICO ®, with its 25 years of experience in the development of a diverse range of lightning protection solutions, solves the problem of required separation distances and sideflash to critical rooftop equipment with the ERITECH® Isolated Downconductor. By applying a high performance insulation around the downconductor, the same isolation as 1000 mm of air separation can be provided. The advantage is that this downconductor can be mounted directly on the mast or structure to be protected – without electrification!


Since ERICO® offered its first isolated downconductor, thousands of buildings have proven this concept. The pioneering use of semi-conductive external outer sheath to bond to the structure and control cable break down was a key to success. The original implementation (ERITECH® ERICORE) was a screened cable version designed for low impedance, this allowed the use of very long cable lengths. The latest ERITECH® Isolated Downconductor customizes this development by offering a lower cost cable targeted at the typical shorter installation requirements of the telecommunication industry. The cable is designed, tested and applied to meet the requirements of IEC 62305 lightning protection standards.


Implementation of the ERITECH® Isolated Downconductor system is based on two sections of the IEC 62305-3 standard (Protection Against Lightning – Part 3: Physical damage to structures and life hazard). For correct installation the system must be designed and installed in accordance with these requirements:

Step 1

Determine the required height of the air terminal to provide protection according to IEC 62305 or NFPA780. The required lightning protection level can be determined by IEC 62035-2 Risk Assessment, or simply using LPL I for maximum protection. Using this information the designer should determine the required minimum height of the air terminal tip above the top of mast/items to be protected. (Note: ERITECH Isolated Downconductor mast requires a minimum clearance distance of 2 m).

Step 2

Determine the length of downconductor and selected lightning protection level so the separation distance (IEC 62305-3 Section 6.3 or NFPA780 Section 4.21) does not exceed 1000 mm.

Step 3

Meet ERICO’s mounting and installation requirements and interconnect to a standard compliant grounding or lightning protection system.

If the maximum cable limitations above can not be adhered to, then it is possible to use two parallel downconductors. The ISODUAL adapter allows a second isolated downconductor to be connected to the air terminal. The second ISODC Downconductor is mounted externally to the Isolated Mast and fixed with UV stable non conductive cable ties.

Staffing & Organisation

Global Lightning Technologies (M) Sdn. Bhd. has about 28 staffs dedicated to the various services and works that the company has undertaken to fulfill the need of our customers.
Global Lightning Technologies (M) Sdn. Bhd. is organised functionally into the following group:


The Organisation Structure is on the following pages :

Contact Information

Global Lightning Technologies (M) Sdn Bhd
Company registration no: (352683-V)
Address: No.36, Jalan TS 6/9, Taman Industri Subang,
Subang Jaya.
47510 Selangor Darul Ehsan, Malaysia.
TEL : +603 563SURGE
+603 5637 8743
+603 5636 9230
+603 5636 9224
Fax : +603 5637 0816
Website :
Email : [email protected]

Kindly send in your enquiry via email .You may facsimile to us at +603 5637 0816 and we will reply as soon as possible.

About GLTM

Global Lightning Technologies (M) Sdn. Bhd. has its origin that dates back to 1986, when Lightning Protection division of DOM Industries (M) Sdn. Bhd. was first set-up.

As a result of strong growth and an increasing demand in this sector it was decided that this division of DOM Industries become a separate entity to focus primarily on Lightning Protection Systems. Hence, on 25TH July 1995, Global Lightning Technologies (M) Sdn. Bhd. was incorporated.

GLTM is primarily focused on providing lightning protection products and services to the local industries. We are capable of providing an engineering based solutions which include

  • Design
  • Supply
  • Engineering
  • Installation
  • Supervision
  • Testing & Commissioning
  • Maintenance
  • Troubleshooting
  • Site Survey & Audit

Our Aim

Our aim is to provide an engineering-based solutions to your lightning solution by providing the most comprehensive study, design and consultation.

Our commitment to provide solutions on lightning related problems over the years has earned us continuous support from some of the biggest corporate clients in Malaysia which includes; PETRONAS, ASTRO, MEASAT, National Space Agency, CELCOM, TNB and many more.

With over 60 mans years of experiences, one can rest assured that only the best line of services will be served.